LED Skid Steer Lights
High-output LED work lights for skid steer loaders.
LED Skid Steer Lights Models13 products
28OE part numbers cross-referenced · 227machine models covered in this range
AC/Case/Cat/Ford/IH/JD/MF LED Cab/Fender/Hood Light – Rear Mount
Part Number: YW-4603R
1/2″ Rear Stud Mount with Built in Heat Sink, Includes: Stainless Steel Hardware, Long Rubber Bezel, Short Rubber Bezel Replaces OEM Part Numbers: Allis Chalmers: 70249146, 70249147 International: 533063R91, 131508C1, 388945R91 John Deere: RE19080, AR85262 Features: IP67 Waterproof EMC CISPR 25 Class 4; documentation available on request
Bobcat/Deere/New Holland Skid Steer LED Headlight
Skid Steer Headlight is a Plug & Play LED Light. Fits into original housing. Replaces OEM Part Numbers: Bobcat: 6661353 John Deere: MG86533428 New Holland: 9829523 Features: IP67 Waterproof EMC CISPR 25 Class 4; documentation available on request
Bobcat M Series Skid Steer LED Left-Hand Headlight
Part Number: YW-9091L
Left Skid Steer Headlight is a Plug & Play LED Light. Fits into original housing. Aluminum housing and durable polycarbonate lens. Replaces OEM Part Numbers: Bobcat: 7251341 (Left Headlight), 7251340 (Right Headlight), Features: IP67 Waterproof EMC CISPR 25 Class 4; documentation available on request
Bobcat M Series Skid Steer LED Right-Hand Headlight
Part Number: YW-9091R
Right Skid Steer Headlight is a Plug & Play LED Light. Fits into original housing. Aluminum housing and durable polycarbonate lens. Replaces OEM Part Numbers: Bobcat: 7251341 (Left Headlight), 7251340 (Right Headlight) Features: IP67 Waterproof EMC CISPR 25 Class 4; documentation available on request
Bobcat Skid Steer LED Headlight
Part Number: YW-8030
Skid Steer Headlight is a Plug & Play LED Light. Fits into original housing, right & left. Aluminum housing and durable polycarbonate lens. Note: Package contains one light that will work for left or the right side. Replaces OEM Part Numbers: Bobcat: 7259523, 7259524, 6718042, 6718043 Features: IP67 Waterproof EMC CISPR 25 Class 4; documentation available on request
Case/John Deere/New Holland Skid Steer LED Headlight
Part Number: YW-4038
Skid Steer Headlight is a direct replacement, Plug & Play LED Light. It fits into the two front lights above the cab and the rear work/reverse light. Replaces OEM Part Numbers; Case: 222004A2 John Deere: KV26918, KV13708, KV13709, AT345169 New Holland: 9844417, 9844418, 86501306, 86533428 Features: IP67 Waterproof EMC CISPR 25 Class 4; documentation available on request
Case/New Holland Skid Steer LED Headlight
Skid Steer Headlight is a Plug & Play LED Light. Fits into original housing. Replaces OEM Part Numbers: Case New Holland: 84306271, 84306268, 84306337 Note: This light fits New Holland Skid Steers with Heavy Duty Light Housing. Features: IP67 Waterproof EMC CISPR 25 Class 4; documentation available on request
Industrial Left LED Headlight for Kubota SSV Skid Steer, TL900L
Part Number: YW-9075L
This LED Light features a durable polycarbonate lens, it is built to be RoHS compliant, and comes with stainless steel hardware. The color of light LEDs emit is near the color spectrum of the mid-day sun and allows the human eye to function and view objects better to improve your work environment. Left LED Headlight for Kubota Skid Steer. Uses Original Mount & Wiring. Includes: Connector and Stainless Steel Hardware. This light will bolt into the original mount on the skid steer. Replaces Kubota Part Number: V1311-53510
Industrial Right LED Headlight for Kubota SSV Skid Steer, TL900R
Part Number: YW-9075R
This LED Light features a durable polycarbonate lens, it is built to be RoHS compliant, and comes with stainless steel hardware. The color of light LEDs emit is near the color spectrum of the mid-day sun and allows the human eye to function and view objects better to improve your work environment. Right LED Headlight for Kubota Skid Steer. Uses Original Mount & Wiring. Includes: Connector and Stainless Steel Hardware. This light will bolt into the original mount on the skid steer. Replaces Kubota Part Number: V1311-53510
John Deere Skid Steer LED Headlight – Flush Mount
Part Number: YW-4414
Plug & Play flush mount LED Light. Direct replacement. Replaces John Deere Part Number: AT352538 Features: IP67 Waterproof EMC CISPR 25 Class 4; documentation available on request
Kubota SSV Series Skid Steer LED Left-Hand Rear Red/White Tail Light
Part Number: YW-9075RL
This LED Light features a durable polycarbonate lens, it is built to be RoHS compliant, and comes with stainless steel hardware. The color of light LEDs emit is near the color spectrum of the mid-day sun and allows the human eye to function and view objects better to improve your work environment. Left LED Tail Light for Kubota Skid Steer. Light consists of red tail light and white work light. Uses Original Mount & Wiring. Includes: Connector and Stainless Steel Hardware. This light will bolt into the original mount on the skid steer. Replaces Kubota Part Number: V1311-53530
Kubota SSV Series Skid Steer LED Right-Hand Rear Red/White Tail Light
Part Number: YW-9075RR
This LED Light features a durable polycarbonate lens, it is built to be RoHS compliant, and comes with stainless steel hardware. The color of light LEDs emit is near the color spectrum of the mid-day sun and allows the human eye to function and view objects better to improve your work environment. Right LED Tail Light for Kubota Skid Steer. Light consists of red tail light and white work light. Uses Original Mount & Wiring. Includes: Connector and Stainless Steel Hardware. This light will bolt into the original mount on the skid steer. Replaces Kubota Part Number: V1311-53530
Why Choose Our LED Skid Steer Lights
Direct Bolt-On Fit
Designed around skid steer mounting points and connectors for a fast swap.
Sealed for the Site
IP-rated against the dust, mud, and wash-down of loader work.
L/R Matched Units
Left- and right-hand versions available where the original fitment requires.
OEM & Custom Options
Every product can be customized to your exact specification. Common options include:
Voltage
- 12V
- 24V
- 48V
- 9–32V Universal
Color Temperature
- 2700–3000K Warm
- 4000K Neutral
- 5000–5700K Standard
- 6000–6500K Cool
Mounting
- Fixed Bracket
- Swivel Mount
- Flush Mount
- Custom Bracket
Beam Angle
- 30° Spot
- 60° Flood
- 90° Wide Flood
- 120° Ultra Wide
OEM Branding
- Logo Engraving
- Custom Housing Colour
- Private Label Packaging
- Custom Cable Length
Built to Your Exact Spec
Tell us your equipment model, voltage, mounting requirements, and certification needs. We'll send a tailored quote within 24 hours.
Request a Custom QuoteCommon Applications
Construction & Earthmoving
High-output LED work lights for excavators, loaders, and earthmoving equipment, built for dust, impact, and long shifts.
Agricultural Machinery
LED work lights for tractors, combines and sprayers: position-by-position plans, 103 direct-fit part numbers, IP69K and 9–32 V for the whole farm fleet.
Municipal & Refuse Vehicles
LED work and safety lights for refuse trucks and municipal fleets, built for daily stop-start duty.
Forestry & Utility Vehicles
Durable LED work lights for forestry machines and utility vehicles, built for impact, debris, and rough off-road terrain.
Our range of LED skid steer lights covers 13 models we manufacture for the way skid steer loaders actually work: model-matched headlights for Bobcat, Case, New Holland, John Deere, Ford, and Kubota machines, plus cab, fender, and hood work lights that bolt onto any loader. Skid steers spend their days in the toughest corner of construction and earthmoving work: tight sites, constant direction changes, and buckets hammering the frame, so every light here is built and sealed for exactly that duty.
How to choose the right skid steer light
Three decisions matter most when specifying lighting for a skid steer fleet:
- Machine fitment: Model-matched headlights reproduce the original housing shape and connector of your loader, so they drop into the existing lamp openings; universal cab and fender work lights use adjustable brackets when you are adding coverage rather than replacing.
- Position and side: Headlight housings are often handed. Left-hand and right-hand units differ, and flush-mount versions sit inside the bodywork where branches and rubble cannot reach them. Order by lamp position, not just by machine model.
- Electrical system: Every model accepts 9–32V DC with potted drivers, so one part number covers the whole mixed fleet and shrugs off the voltage swings of hard hydraulic work.
Fitments across the major loader brands
The range concentrates on the loaders you see on every site: dedicated headlights for Bobcat machines including handed left and right units for the M Series, shared-housing lamps that fit Bobcat, John Deere, and New Holland openings, Case and New Holland fitments, and a flush-mount John Deere unit. For the full set of drop-in Bobcat options, see our dedicated Bobcat replacement lights range; the cab, fender, and hood lights here extend that coverage to Ford, Kubota, and older utility machines.
Kubota loaders are covered by series, not by guesswork. The SSV series takes handed industrial headlights and a handed rear red/white lamp pair; the SVL series takes its own headlight housing. Ordering by series and side is the difference between a bolt-in swap and a returned part.
Built for the shaking a skid steer dishes out
No machine vibrates like a skid steer: the operator cab sits directly on a rigid frame while the bucket slams into piles all shift. Filament bulbs rarely last in this environment. Every light in this range uses solid-state LEDs with nothing to shake loose, potted electronics that absorb frame shock, sealed IP67–IP69K housings that survive pressure washing and mud immersion, and stainless steel brackets that hold their aim through years of loading cycles.
OEM and wholesale ordering
We manufacture skid steer lights for OEM brands, dealer networks, and construction-parts distributors worldwide. Standard MOQ is 60 pieces per model with 15–25 day production lead times; sample orders of 1–5 units let your workshop verify fitment on real machines before you commit. Private-label branding, custom connectors and cable lengths, and CE / E-Mark / DOT certification documents are available on request. Send us your loader models and we will map lamp positions to part numbers for you.
Loader headlights across all brands, with the OEM part numbers they replace, are collected in our LED tractor and equipment headlights range.
Beyond the catalogue, we also develop lights from scratch to customer requirements, from design and 3D-printed prototypes to production tooling, with exclusive supply protection. Learn more about our custom LED light development service.
How beam choice changes by machine class is covered in our guide to LED lights for heavy equipment.
Frequently Asked Questions
Which skid steer brands do these fit?
We carry direct-fit headlights for Case, New Holland, Kubota, and other common skid steers. Send us your make and model to confirm.
Are these a direct replacement?
Yes. They fit the original mounting and connector while delivering higher LED output.
Are left- and right-hand units required?
Some machines use handed left/right lamps; we'll confirm what your model requires.
Can one light serve Bobcat, John Deere, and New Holland loaders?
Yes. Several lamps in this range use the shared housing those brands fitted at the factory, so a single stocked part number drops into all three openings. For Bobcat-only positions, see the dedicated Bobcat replacement lights range.
Should we choose flush-mount or bracket-mount skid steer lights?
Choose flush-mount when replacing lamps inside the bodywork, where branches and rubble cannot strike them; choose bracket-mount work lights when adding coverage, since the adjustable bracket bolts to cab, fender, or hood and lets you aim the beam exactly where the bucket works.
Do skid steers need work lights beyond the standard headlights?
On night shifts, yes. Headlights only cover the travel path, so most fleets add cab or hood floods over the bucket and a rear-facing unit for reversing on tight sites. For machines beyond skid steers, browse the full construction work lights programme.
Need a specific product?
Our team will recommend the right model for your equipment and operating environment.
Talk to an Engineer or browse all LED Skid Steer Lights →Need Custom LED Skid Steer Lights?
Tell us your wattage, IP rating, and application and we'll spec the right product for your equipment.
